Energized Electrical Work Permit
California State University, Fresno
PART I: TO BE COMPLETED BY THE REQUESTER: Work Order Number ______________
(1) Description of circuit/equipment/ job location:
(2) Description of work to be done:
(3) Justification of why the circuit/equipment/cannot be de-energized or the work
deferred until the next scheduled
outage:
Requester / Title ________________________________Date _________________________________
PART II: TO BE COMPLETED BY THE ELECTRICALLY QUALIFIED PERSONS DOING THE WORK:
(1) Detailed job description procedure to be used in performing the above detailed work:
(2) Description of the Safe Work Practices to be employed:
(3) Results of the Shock Hazard Analysis:
(4) Determination of Shock Protection Boundaries:
(5) Results of the Arc Flash Hazard Analysis:
(6) Determination of the Arc Flash Protection Boundary:
(7) Necessary personal protective equipment to safely perform the assigned task:
(8) Means employed to restrict the access of unqualified persons from the work area:
(9) Evidence of completion of Job Briefing including discussion of any job-related hazards:
(10) Do you agree the above described work can be done safely? Yes No (If no, return to requester)
Electrically Qualified Person Date
Electrically Qualified Person Date
PART III: APPROVAL(S) TO PERFORM THE WORK WHILE ELECTRICALLY ENERGIZED:
Appropriate Manager Date
This HTML version was generated with AI assistance and may contain errors or omissions. The original approved PDF remains the official document of record. An alternative accessible format is available upon request from the document creator in accordance with Title II of the ADA.